BLOCK BIMS ADHESIVE

BLOCK BIMS ADHESIVE

18.09.2020
224

Block Bims Adhesive; Walling mortar, that is used for, putting up a gas concrete wall, easy to prepare and applicable, high stability, cement basis and strenghten with chemical polimer additives.

APPLICATION AREAS

• lntemal and external areas, Bims concrete wall. Using is simple and practicable.

APPLICATION

• The application surface has to be prepared by controlling the application surface whether, in good condition, cleaned and balanced. is the temparature of the surface is more than + 25° C, the surface has to be moistened. Mix 25 kg. Bims Concrete Adhesive with 6.5-7 lt. water in a conta iner with a low speed mixer until a homogenous mixture without lumps is obtained. This mixture is left far settlement approximately for 5 minutes and by mixing again the mixture gets ready for using.

SURFACE PREPARATlON AND SUGGESTION

• Application surface has to be purified from the holding on preventing materials such as dust, painting, dirt.

• The surface has to be moistured before application.

• As it is a cement basis material, the hands needs to be protected. Gloves have to be used.

PACKAGING AND STORAGE

• Shelf life is 10 months in 25 kg kraft bags stored in dry and cool place.